Layout Table~~~~1728~1728~~

Electronic Speed Controllers~~~~1728~2277~~

Bread~

~~~1728~2896~~

New Display Item~~~~1728~2898~~

New Display Item~

A good selection of Electronic speed controllers covering most
of the model boating world from 15amp to 60amp contentiousness with these there should be one to suit your needs.

~~~1728~2278~~

New Display Item~~~~1728~2281~~

New Layout Table~~~~1728~2279~~

New Display Item~~~~1728~2282~~

Mtronik Viper 15 Marine~Viper Marine15

Forwards & Reverse Marine ESC
The series consists of forwards only, reversible & marine spec controllers handling every job you can
expect from the latest state of the art technology.

* NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
* ABSOLUTE short circuit and motor overload protection
* 15A current limit
* 100% Waterproof
* 6-12Volts input voltage~ * NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
* ABSOLUTE short circuit and motor overload protection
* 15A current limit
* Dual core microprocessor
* 6-12Volts input voltage
* Adjustable features include programmable punch on the forwards only range and programmable reverse (including disable) & programmable brakes on the reversible range
* 4 Layer super power circuit board
* Thermal integrated protection system
* Digital one touchset up
* Legendary 100% waterproof design
* Dimensions : L39.0mm x W34.0mm x H13.0mm
* Weight : 55g

All VIPER ESCs are capable of running up to 4500mAh cells & the latest high spec motors. Each VIPER ESC incorporates the latest state of the art technology and GEN-Xi power FETs!
VIPER - ULTIMATE RELIABILITY~Mtronik Viper 15 Marine|Mtronik/Viper-15/Marine|~1728~2280~Mtronik Electronic Speed controller 15~

Mtronik Viper 20 Marine~Viper Marine20
Forwards & Reverse Marine ESC
The series consists of forwards only, reversible & marine spec controllers handling every job you canexpect from the latest state of the art technology.

* NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
* ABSOLUTE short circuit and motor overload protection* 20A current limit
* 100% Waterproof
* 6-12Volts input voltage~ Viper Marine20
Forwards & Reverse Marine ESC

Direct from the UK, Mtroniks have designed the updated, more intelligent VIPER range of ESCs.

The series consists of forwards only, reversible & marine spec controllers handling every job you can expect from the latest state of the art technology.

* NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST*
* ABSOLUTE short circuit and motor overload protection
* 20A current limit
* Dual core microprocessor
* 6-12Volts input voltage
* Adjustable features include programmable punch on the forwards only range and programmable reverse (including disable) & programmable brakes on the reversible range
* 4 Layer super power circuit board
* Thermal integrated protection system
* Digital one touchset up
* Legendary 100% waterproof design
* Dimensions : L39.0mm x W34.0mm x H13.0mm
* Weight : 55g

All VIPER ESCs are capable of running up to 4500mAh cells & the latest high spec motors. Each VIPER ESC incorporates the latest state of the art technology and GEN-Xi power FETs!

~Mtronik Viper 20 Marine|Mtronik Viper 20 Marine|~1728~4246~Mtronik Electronic Speed controller 20~

Mtronik viper 25 Marine~Viper Marine 25
Forwards & Reverse Marine ESC
The series consists of forwards only, reversible & marine spec controllers handling every job you canexpect from the latest state of the art technology.

* NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
* ABSOLUTE short circuit and motor overload protection* 20A current limit
* 100% Waterproof
* 6-12Volts input voltage~Viper Marine 25Forwards & Reverse Marine ESC

The series consists of forwards only, reversible & marine spec controllers handling every job you can
expect from the latest state of the art technology.

* NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
* ABSOLUTE short circuit and motor overload protection
* 25A current limit
* Dual core microprocessor
* 6-12Volts input voltage
* Adjustable features include programmable punch on the forwards only range and programmable reverse (including disable) & programmable brakes on the reversible range
* 4 Layer super power circuit board
* Thermal integrated protection system
* Digital one touchset up
* Legendary 100% waterproof design
* Dimensions : L39.0mm x W34.0mm x H13.0mm
* Weight : 55g

All VIPER ESCs are capable of running up to 4500mAh cells & the latest high spec motors. Each VIPER
ESC incorporates the latest state of the art technology and GEN-Xi power FETs!

~Mtronik viper 25 Marine|Mtronik viper 25 Marine|~1728~4248~Mtronik Electronic Speed controller 25~

Mtronik Viper 40 Marine~Viper Marine40Forwards & Reverse Marine ESC

The series consists of forwards only, reversible & marine spec controllers handling every job you can
expect from the latest state of the art technology.

* NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
* ABSOLUTE short circuit and motor overload protection
* 40A current limit
* 100% Waterproof
* 6-12Volts input voltage~Viper Marine40Forwards & Reverse Marine ESC

The series consists of forwards only, reversible & marine spec controllers handling every job you can
expect from the latest state of the art technology.

* NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
* ABSOLUTE short circuit and motor overload protection
* 40A current limit
* Dual core microprocessor
* 6-12Volts input voltage
* Adjustable features include programmable punch on the forwards only range and programmable reverse (including disable) & programmable brakes on the reversible range
* 4 Layer super power circuit board
* Thermal integrated protection system
* Digital one touchset up
* Legendary 100% waterproof design
* Dimensions : L39.0mm x W34.0mm x H13.0mm
* Weight : 55g

All VIPER ESCs are capable of running up to 4500mAh cells & the latest high spec motors. Each VIPER
ESC incorporates the latest state of the art technology and GEN-Xi power FETs!

~Mtronik Viper 40 Marine|Mtronik/ Viper 40/ Marine|~1728~2283~Mtronic Viper 40 Speed Controller~

Mtronik Sonik 4 Super Marine~Sonik4 SUPER Marine
Dual Motor 75A Marine ESC

Sonik4 Forwards and reverse Marine ESC. Motors and batteries have moved on.so have we! The Sonik4
incorporates high power Gen Xi-FET technology with a new heavy duty, light weight heatsink which
provides 50% more effective cooling! The new intelligent power delivery system (PDS) minimises
wasted power, maximises traction and reduces motor wear and heat.With improved protection, the Sonik4 range offers something for all levels of the hobby!

* 100% Waterproof
* 75A motor limit
* 6.0V to 12.0V Operating voltage (5 to 10 cells)
~Sonik4 SUPER Marine
Dual Motor 75A Marine ESC

Sonik4 Forwards and reverse Marine ESC. Motors and batteries have moved on.so have we! The Sonik4
incorporates high power Gen Xi-FET technology with a new heavy duty, light weight heatsink which
provides 50% more effective cooling! The new intelligent power delivery system (PDS) minimises
wasted power, maximises traction and reduces motor wear and heat.With improved protection, the Sonik4 range offers something for all levels of the hobby!

* 100% Waterproof
* 75A motor limit
* 6.0V to 12.0V Operating voltage (5 to 10 cells)
* 1KHz drive frequency
* 0.0068V drop at 10A
* Maximum current rating, 75A
* 1.5A BEC
* Dimensions : L68.0mm x W34.0mm x H15mm
* Weight : 85g

High power marine ESC ideal for small scale models and high power speed boats or twin-motor craft. Also
uses an uprated BEC. Instant reverse action!~Mtronik Sonik 4 Super Marine|Mtronik/Sonik 4 Super/Marine|~1728~2284~Mtronik Speed Controller~

Electronize Type FR15 HVR~FR15HVR
Speed controllers are designed to extend the use of the control to faster and larger models with motors
drawing up to 15 amp. continuous current.

*45 amp. short term stall rating. (continuous MOSFET rating)
*5 volt regulator (BEC) for single battery operation.
*1 amp. regulator rating with overload protection.
*15 amp. continuous load rating.
~43HVR
Speed controllers are designed to extend the use of the control to faster and larger models with motors drawing up to 15 amp. continuous current. The basic design of the 10 amp. controls is retained whilst the power handling components are uprated.

Features

*Standard radio control servo signal (standard connector supplied)
*Smooth P.W.M. forward and reverse speed control
*Low loss Power MOSFET current switching
*Protection against reversed motor battery
*Adjustable balance for zero speed position
*Adjustable 'span' to match maximum speed to throttle stick travel
*6 to 24 volt motor battery operation (5.5 volt min.)
*All units available in DIY kit version
*Type 43HX and 43HVR*15 amp. continuous load rating.
*45 amp. short term stall rating. (continuous MOSFET rating)*
*5 volt regulator (BEC) for single battery operation.
*1 amp. regulator rating with overload protection.
~Electronize Type FR15 HVR|Electronize/Type FR15 HVR/15amp|~1728~2293~Electronize Speed Controller 43 hvr~

Electronize Type FR30 HX~ FR30HX
Is the first of a new range of microprocessor based speed controllers. The power of a
microprocessor has enabled us to improve even on the market leading 43 series controllers and include
many features not found on other controllers. The use of twin, ultra miniature 30 amp. rated automotive relays has allowed a genuine 30 amp. continuous rating.
The FR30HX also has a selectable operating mode, giving a choice of high, low or variable frequency.
Operating at low frequency gives better starting and low speed control, whereas high frequency gives smoother and more efficient high speed performance. The unique Electronize variable frequency mode
gives the best of both worlds. It's a best performance low frequency controller, a smooth mid-range controller and an efficient high frequency controller all at the same time.
~ FR30HX
Is the first of a new range of microprocessor based speed controllers. The power of a
microprocessor has enabled us to improve even on the market leading 43 series controllers and include
many features not found on other controllers. The use of twin, ultra miniature 30 amp. rated automotive relays has allowed a genuine 30 amp. continuous rating.
The FR30HX also has a selectable operating mode, giving a choice of high, low or variable frequency.
Operating at low frequency gives better starting and low speed control, whereas high frequency gives smoother and more efficient high speed performance. The unique Electronize variable frequency mode
gives the best of both worlds. It's a best performance low frequency controller, a smooth mid-range controller and an efficient high frequency controller all at the same time.

Features
Standard radio control servo signal input. (standard connector supplied)
Smooth P.W.M. forward and reverse speed control.
Selectable operating mode.
Low frequency mode: 100Hz
Variable frequency mode: 10 to 1000Hz
High frequency mode: 2000Hz
Low loss Power MOSFET current switching. (Only 2.7 milli-Ohms)
Low loss heavy duty cables. (0.25mm2)
High current automotive relays designed specifically for high power motor control.
Precision pre-set neutral.
Adjustable speed range to match throttle stick travel or scale speed.
6 to 24 volt motor battery operation. (5.5 volt min.)
30 amp. continuous load rating in either direction.
90 amp. short term stall rating. (continuous MOSFET rating)*
540 amp. peak rating.
~Electronize Type FR30 HX|Electronize/Type FR30 HX/30amp|~1728~2294~Electronize Speed Controller 30hx~

Robbe Rocraft 120 up Navy~Small, economically priced controller for model boats, capable of controlling motors of medium to high power
. The standard Rokraft 120 mP is very powerful, but this version can cope with even higher power
levels over long periods if the additional water cooling system is used. This is very important with model
boats equipped with high-capacity NC packs and lead-acid batteries. Suitable for 600, 700 and 1000
Power motors. Can also be used with the water cooling disconnected in this case the specification is
as for the Rokraft 120 mP.Acrylic lacquer seal for protection against splash damage.
Operating voltage: 6 - 12 Volts~Small, economically priced controller for model boats, capable of controlling motors of medium to high
power. The standard Rokraft 120 mP is very powerful, but this version can cope with even higher
power levels over long periods if the additional water cooling system is used. This is very important with model boats equipped with high-capacity NC packs and lead-acid batteries. Suitable for 600, 700
and 1000 Power motors. Can also be used with the water cooling disconnected; in this case the
specification is as for the Rokraft 120 mP.Acrylic lacquer seal for protection against splash damage.

Rokraft µP
A new generation of low-cost electronic speed controllers with full-range reverse stage for electric cars,
trucks and boats. Micro-processor controlled, with high motor pulse frequency, fine for standard
and "hot" motors. Special arrangement of dynamic brake and reverse stage avoids premature
gearbox damage.

Features:

* Fine proportional control
* High motor pulse frequency (hec)
* Fine control at start-up
* High-flex silicone cables
* Heavy-duty BEC power supply
* Zero-wear output stage
* Excess temperature protection (TP)
* POR - power on protection
* PCO - low voltage power-off
* Rx filter - switches controller off if transmitter signal fails or is invalid
* Acrylic lacquer seal for protection against splash damage.

ultra-simple programming of the ranges forward, stop, dynamic brake and reverse. Only one input button
and LED indicator
Specification:
Operating voltage: 5 - 10 Volts
Weight: 54 g
Momentary: 30.00 A
connector system: AMP
Dimensions: 55 x 41 x 13 mm BEC: 5 V, 1.2 A
more Specification:
Operating voltage: 5 - 10 NC with BEC (or 6-12 V lead/acid batt.)
Functions: Forward, stop, dyn. brake, reverse
Features: BEC, hec, eps, TP, POR, PCO, WP, Rx filter, water-cooling.
~Robbe Rocraft 120 up Navy|Robbe/ Rocraft 120 up Navy|~1728~2297~Robbe Speed Controller 120up~

Robbe Navy Control 535~High-performance speed controller with forward stop reverse functions, for 600...700 size motors or
multi-motor models with 500-700 size motors; also for Pro, Sports and Ultra motors. Full forward
reverse control with high resolution, excluding unnecessary brake function. Expanded controller neutral
point with pre-programmed non-linear control curve for finer control when maneuvering.
Operating voltage: 6 - 17 Volts
Weight: 62 g
Dimensions: 65 x 39 x 18.5 mm
~High-performance speed controller with forward stop reverse functions, for 600...700 size motors
or multi-motor models with 500-700 size motors; also for Pro, Sports and Ultra motors. Full forward reverse
control with high resolution,excluding unnecessary brake function. Expanded controller neutral point
with pre-programmed non-linear control curve for finer control when manoeuvring. The 1000 Hz pulse
frequency avoids motor damage and gives a smooth motor start. Galvanic separation (OPTO)
between motor and receiver power circuit prevents interference to the receiving system from brush sparking.
The integral ´Rx-Filter´ active interference suppression system shields the receiver from motor interference and suppresses invalid signals. With power-on guard and thermal overload protection.
Simple to adjust the speed controller using the ´eps´ easy programming system. With integral water cooling
system for long operating times at high load currents. Can also be used without water cooling;
maximum continuous current is then reduced to 25 A. Sealed with acrylic lacquer to protect from splash damage.
Specification:
Operating voltage: 6 - 17 Volts
Weight: 62g
Dimensions: 65 x 39 x 18.5 mm~Robbe Navy Control 535|Robbe/ Navy Control 535|~1728~2298~Robbe Speed Controller 535~

Jeti 600 Navy~The Jeti 600 Navy is one of the latest generation of speed controllers with auto set up for most transmitter types .
Uses this Esc will coupe with most higher power motors you can think of (not brushless though) ideal for those high performance speed boats with 10cells and over .
Also uses TOP Temperature Overload Protection if temp rises to 100/110 dec controller cuts out also puts out audible alarm tone

dimensions: 50 x 26 x 14 mm
weight: 23/40 g
continuous current:60 A
accu: 8 - 30 NiXX
brake: no
~~Jeti 600 Navy|Jeti-600-navy|~1728~3726~Jeti 600 Navy, Speed controller~

Barracuda-80 Brushless Motor Control~Barracuda-80 Brushless Motor Control

The ultimate hop up for marine competition

The Barracuda-80 is the ultimate high power sensorless control with a whopping 120-amp surge rating! Completely water-proofed with pistol radio throttle control it's the ultimate hop-up for competition racers. Ask national champion Dick Crowe. Dick won the 2003 N2 Hydro and O Mono categories with his Barracuda-80 controller.

Despite its high current capability the Barracuda-80 is still a compact, lightweight alternative to other controls on the market. At a mere 2.1 ounces (60g) with full length wires, the controller is packed with features! It comes with the full range of Barracuda programming options including adjustable switching rate, programmable brake and several timing modes for the ultimate in competition controllers.

Specs
Cells w/BEC 5-12 , Cells w/o BEC 5-20 , Continuous 80 amps , Switching Rate Programmable(11, 22, or 41 kHz)
Resistance 0.001 ohms , Brake Programmable , Reversible Yes - change any two wires , Low Voltage Cut-off Programmable
Size 1.05 x 2.65 x 0.45" , Weight (w/wires) 2.1 oz (60g) , Waterproof Universal~Barracuda-80 Brushless Motor Control

The ultimate hop up for marine competition

The Barracuda-80 is the ultimate high power sensorless control with a whopping 120-amp surge rating! Completely water-proofed with pistol radio throttle control it's the ultimate hop-up for competition racers. Ask national champion Dick Crowe. Dick won the 2003 N2 Hydro and O Mono categories with his Barracuda-80 controller.

Despite its high current capability the Barracuda-80 is still a compact, lightweight alternative to other controls on the market. At a mere 2.1 ounces (60g) with full length wires, the controller is packed with features! It comes with the full range of Barracuda programming options including adjustable switching rate, programmable brake and several timing modes for the ultimate in competition controllers.

See the Barracuda-80 User Guide (208k PDF)for more details.

All Castle Creations speed controls feature:
* Battery Eliminator Circuit (BEC): eliminates receiver battery
* Safe "Power On"
* Microprocessor Controlled
* Tough surface mount construction
* Audible Arming Signal
* Auto Motor cut-off with reset
* Low torque "Soft Start": protects gear boxes and belt drives from shock
* Smooth reverse exponential throttle
* Self-calibrating endpoints: maximizes usable stick travel
* Auto shut-down when signal is lost
* Simple setup: no complicated switches
or wiring
~Barracuda-80 Brushless Motor Control|Overlander/Barracuda-80 Brushless Motor Control|~1728~5025~Barracuda-80 Brushless Motor Control,~

Barracuda-125 Brushless Motor Control~Barracuda-125 Brushless Motor Control

Designed for the rigors of high current competition racing

The Barracuda-125 is the ultimate competition boat control with a whopping 125 amp continuous current rating! Completely waterproofed with a silicone conformal coating, and with pistol grip style radio throttle control, it's the no nonsense choice for competition racers. The Barracuda-125 adds a second weapon to the championship team of Barracuda competition controllers and is sure to start racking up championships just like the Barracuda-80 has already done.

Despite its high current capability, the Barracuda-125 is still a compact, lightweight, and reliable alternative to other high output capable controls on the market. The Barracuda-125 is also packed with features! It comes with the full range of Barracuda programming options including competition and Lipoly friendly cutoff voltages, adjustable PWM switching rate, programmable brake/reverse and several timing modes for the ultimate in competition controllers.

Specs
Cells w/BEC 5-12 , Cells w/o BEC 5-20 , Continuous 125 amps , Switching Rate Programmable , (11, 22, or 41 kHz)
Resistance 0.0008 ohms , Brake Programmable , Reversible Yes - change any two wires , Low Voltage
Cut-off Programmable , Size 1.05 x 2.65 x 0.45" , Connector Type Waterproof Universal
~Barracuda-125 Brushless Motor Control

Designed for the rigors of high current competition racing

The Barracuda-125 is the ultimate competition boat control with a whopping 125 amp continuous current rating! Completely waterproofed with a silicone conformal coating, and with pistol grip style radio throttle control, it's the no nonsense choice for competition racers. The Barracuda-125 adds a second weapon to the championship team of Barracuda competition controllers and is sure to start racking up championships just like the Barracuda-80 has already done.

Despite its high current capability, the Barracuda-125 is still a compact, lightweight, and reliable alternative to other high output capable controls on the market. The Barracuda-125 is also packed with features! It comes with the full range of Barracuda programming options including competition and Lipoly friendly cutoff voltages, adjustable PWM switching rate, programmable brake/reverse and several timing modes for the ultimate in competition controllers.

See the Barracuda-125 User Guide (64k PDF) for more details.

All Castle Creations speed controls feature:
* Battery Eliminator Circuit (BEC): eliminates receiver battery
* Safe "Power On"
* Microprocessor Controlled
* Tough surface mount construction
* Audible Arming Signal
* Auto Motor cut-off with reset
* Low torque "Soft Start": protects gear boxes and belt drives from shock
* Smooth reverse exponential throttle
* Self-calibrating endpoints: maximizes usable stick travel
* Auto shut-down when signal is lost
* Simple setup: no complicated switches
or wiring~Barracuda-125 Brushless Motor Control|Overlander/Barracuda-125 Brushless Motor Control|~1728~5027~Barracuda-125 Brushless Motor Control,castel Ceations~

Align 35A Brushless With Reverse ESC K10212A~Fearture:
Reverse and ABS brakes are options,support 1/2 or 1/3 neutral mode radio system.
Small and compact PCB design for ease of installation.
Large heatsink for great thermal performance.
High compatibility to work with 98% brushless motors in the market.
Ultra smooth motor start design to run with all kinds of brushless motors.
The power inlet adapts Japanese made "Low ESR" capacitor in order to provide stable power source.
T BEC power outlet adapts a Japanese made specialty polymer aluminum electrolytic capacitor. It porvides better noise filtering capability than other
BL ESC in the market, and moreover to give more stable performance of R/C receiver and BEC.
The BEC adapts dual TO-252 package regulators. It provides great thermal performance with 2A peak current.
The throttle has more than 200 steps resolution that provides great controlling sense.

Specs
Continuous current:35Amps with porper air flow , Surge current:45Amps for 15seconds , Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
Supporting maximum RPM:2poles=>190,000rpm , Supporting input voltage:5.5V%7E16.8V
Supporting battery types: Li-ion/ Li-poly 2%7E4 cells, Ni-Mh 6-12 cells
BEC output: Max current 2A , 2 cells Lithium/6%7E7 Ni-Mh cells=>4servos , 3 cells Lithium/8%7E9 Ni-Mh cells=>3servos
4 cells Lithium/10%7E12 Ni-Mh cells=>2servos
Size:45 X 22 X 12mm , Weight:25g
~~Align 35A Brushless With Reverse ESC K10212A|Align/Brushless ESC/ K10212A|~1728~5473~Align, 35A Brushless Speed controller With Reverse, K10212A~

Roxxy BL Control 918 Reversible Brushless~The 900 series is a further development of the proven ROXXY BL-800 series, and now offers a range of new functions which make these speed controllers equally suitable for use in Model boats .
# The new functions: Programmable forward / reverse function, ideal for model boat applications.
# Governor mode, optionally programmable with or without speed regulator.
# Plug-in programming card for simple and unambiguous function set-up.
# Additional features: Can be set for use with in-runner and outrunner motors; LED indicator.
# Brake can be programmed on and off.
# High pulse frequency (32,000 Hz) for ultrafine speed control, .
# Integral temperature guard protects the controller from thermally induced damage.
# Designed for 6 .. 12 NC / NiMH or 2 ... 4 LiPo cells.
# Programmable low-voltage cut-off.
# Like all robbe speed controllers, these units are fitted with the usual protective and filter functions, including POR power-on guard and RX filter.
# Designed specifically to match the ROXXY series of BL motors, but can also be used with other brushless motors.

# Programmable basic functions: NC / NiMH or LiPo battery type , Motor direction left, right, forward / reverse , Brake On / Off
Model type select: fixed-wing, boat or helicopter

Specification: Weight: 13 g ,Momentary: 22.00 A , Dimensions: 21 x 16 x 7 mm BEC: 5 Volt / max. 2 A ,
More Specification:, Auxiliary functions (only with the programming card,No. 8633) Cut-off voltage NC / NiMH:6 .. 7 cells = 0.9 V / cell
8 ... 12 cells = 7.2 Volt ,2 LiPo: 5.5 Volt ,3 LiPo: 8.3 Volt ,4 LiPo: 11 Volt
# Cut-off mode , Motor timing , Acceleration , Start power , Brake power , Governor (speed regulator mode)

Not Available Till April

Price Guid £37.99

~~Roxxy BL Control 918 Reversible Brushless|Robbe/Roxxy-Bl-918 ESC/8628|~1728~5481~Robbe,Roxxy BL Control 918 Reversible Brushless Speed controller~